Description (介紹)
PTFE molding powder resin, limited free-flow grade is suitable for molding to produce rods, sheets, tubes, skived films and gasket etc. It is white powder with excellent chemical stability and electrical property and low frictional coefficient.
Specification (指標)
Item | JX- 102 | ||
Grade A | Qualified | ||
Smoothness and Cleaness | Clean & white surface, | Clean & white surface, | |
Tensile Strength (MPa)≥ | 27 | 25.5 | |
Elongation at Rupture %,≥ | 250 | ||
Volume Density (g/L) | 500±100 | ||
Average Grain, (um) | 150±70 | ||
Moisture Content%,≤ | 0.04 | ||
Melting Point | 327±5 | ||
Standard Relative Density | 2.130-2.160 | ||
Thermal Instability Index,≤ | 20 | ||
Electrical Strength,(KV/mm)≥ | 60 | ---------------- |
Packing (包裝)
There are three kind of package ,25kgs, 30kgs and 1000kgs per drum
Storage & Transportation (儲存和運輸)
Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, high temperature and below 0°C.
After three months, shaking the drum every week to avoid the deposition.
Applications (應用)
Make extruded tube,rod,tensile film,seal tape,etc.
- PreviousBeta cyclodextrin
- NextNo Information